New Delhi: Chennai-based space start-up Agnikul Cosmos Thursday successfully carried out a sub-orbital test-flight of its home-built 3D-printed semi-cryogenic rocket — Agnibaan — from its own launch pad at Sriharikota, making it India’s second private entity to do so.
After four unsuccessful attempts, the test flight of Agnibaan Sub-Orbital Technology Demonstrator (SOrTeD) Thursday took place at 7:15am without any live streaming and in the presence of fewer dignitaries at the Sriharikota launch pad located within ISRO’s Satish Dhawan Space Centre.
“Humbled to announce the successful completion of our first flight – Mission 01 of Agnibaan SOrTeD – from our own and India’s first and only private Launchpad within SDSC-SHAR at Sriharikota,” Agnikul Cosmos said on X.
It said all the mission objectives of this controlled vertical ascent flight were met and performance was nominal.
“The vehicle was completely designed in-house and was powered by the world’s first single piece 3D printed engine and also happens to be India’s first flight with a semi-cryo engine,” the start-up said.
Agnikul is looking at flying an orbital mission towards the end of the financial year of 2025.
Hyderabad-based Skyroot Aerospace was the first private Indian entity to launch its sub-orbital rocket Vikram-S in November 2022.
ISRO Chairman S Somanath said, “The success involving many firsts including 3D printed semi-cryogenic engine, flight control systems etc. demonstrate the prowess of indigenous design and innovation. It motivates ISRO to support the Space startups and Non-governmental entities for innovation and Atmanirbharata to create a vibrant space ecosystem in the country.”
Pawan Goenka, Chairman of space regulator Indian National Space Promotion and Authorisation Centre (IN-SPACe) said the successful launch of Agnibaan SOrTeD was a historic moment for India’s space sector.
“The successful launch of the Agnibaan SOrTeD is not just a milestone for Agnikul Cosmos but marks a significant moment for private players who are contributing to growing India’s space sector,” Goenka said.
This was the fifth attempt by Agnikul to launch the Agnibaan SOrTeD since March 22. The earlier attempts on March 22, April 6, April 7 and May 28 had to be called off due to technical difficulties.
“We are proud to present India’s first Semi-cryo rocket engine, which is also the world’s most integrated single shot 3D printed piece. It signals the ability to rapidly assemble rockets that is unparalleled,”Satyanarayanan R Chakravarthy, founding advisor of Agnikul Cosmos and Head of the National Centre for Combustion Research and Development (NCCRD) at IIT Madras said.
The Agnikul team consists of over 200 engineers and is associated with NCCRD at IIT Madras and is also guided by 45 former scientists from ISRO.
“This is the culmination of 1000s of hours of reviews and hard work by the team. We are blessed to have had the opportunity and the full support of IN-SPACe and ISRO to design and build original space-worthy hardware in India,” Srinath Ravichandran, Co-Founder and CEO, Agnikul Cosmos, said.
“This is a huge boost and a proud moment for India’s thriving private space industry and just a glimpse into what the future holds for us, our hearty congratulations to the entire team behind this and best wishes for their future efforts,” Lt Gen A K Bhatt (retd) Director General, Indian Space Association (ISpA) said.
Agnibaan is a customisable, two-stage launch vehicle that can carry a payload of up to 300 kg into orbit of about 700 km, according to the company.
The rocket uses a semi-cryogenic engine with a mix of liquid and gas propellants, a technology that is yet to be demonstrated by the Indian Space Research Organisation (ISRO) in any of its rockets.
The SOrTeD mission is a single-stage launch vehicle demonstration that will be powered by a semi-cryogenic engine, the Agnilet, a sub-cooled liquid oxygen-based propulsion system developed indigenously.
The start-up has readied the vehicle with the first-ever ethernet-based avionics architecture and fully in-house developed autopilot software from India.
Powered by sub-cooled Liquid Oxygen (LOX) and Aviation Turbine Fuel (ATF), the vehicle is equipped with four carbon composite fins to provide passive control.
The Agnilet engine is the world’s first single-piece 3D-printed semi-cryogenic rocket engine.
The mission will last just over two minutes from launch to splashdown.
Following lift-off, the vehicle is expected to perform a pitch-over manoeuvre nearly four seconds into flight.
This manoeuvre involves the controlled rotation of the vehicle to change its orientation from vertical to a predetermined angle with respect to the ground or its flight path.
The vehicle will then go into the wind-biasing manoeuvre at just over 39 seconds, which is introduced in rockets to compensate for the effects of wind on the trajectory of the rocket during ascent.
At 1 minute 29 seconds, the launch vehicle is expected to reach apogee, the point it will be farthest from the launch site before it splashes down at just over two minutes into the flight, marking the completion of the mission.
PTI
